• Multi-Storey Buildings
• Skyscrapers
• Bridges
• Tunnels
• Water Retaining Structures
• Industrial Structures

• International Projects

	Epping to Chatswood Tunnel This section of the rail tunnel passed through a national park and was originally proposed as a bridge. Due to community concerns they decided to tunnel below the national park. Cut and cover was the proposed method as the tunnel roof was just ...
	Jyndabyne Dam Jindabyne Dam, one of a series of dams that forms part of Australia's famous Snowy Mountains Hydro Electric Scheme had a new 3.6 metre diameter tunnel, training walls, spillway walls and new intake tower added in 2005. The projects is part ...
	BGC Offices The project involved the construction of a 8-level office tower with 4 levels of carpark on the lower floors and 4 levels of office space on the upper floors. The total slab area was 13,000 m2.
	Bonville Bypass The Bonville Bypass project involved the construction of the Northbound Bridge over Service Road at the Pacific Highway.
	Geelong Bypass Section one of the Geelong Bypass project involved a new bypass from Corio to the Midland Highway. The rail overpass consisted of two abutments each measuring 36 metres long by 9.8 metres high.

The following pages show examples from typical construction sectors. However, the photographs only show the situation on site at the time the photos were taken and although they may offer suggestions, they are therefore not to be taken as indicating the correct way formwork and scaffolding should be used particularly where safety and other details are concerned.