You are on PERI's international website. Click here to switch to PERI USA. Click here to view all PERI websites.

VARIOKIT Cantilevered Parapet Track VGB


The VGB cantilevered parapet track is used for the fabrication and refurbishment of outer and centered cantilevered parapets – preferably starting from a superstructure length of more than 150 m. The track runs on castors which are mounted to the lower part of the cantilever and it is moved via an integrated rope winch. A precondition for the utilization is a cantilever without interruptions and with a minimum width of 1.50 m.

The cantilevered parapet bracket can be flexibly adjusted to very different parapet geometries.

Time-saving execution due to setting and striking in just two steps per unit. 

The roller units safely carry the full concrete load without extra anchors.

Technische Daten

  • Individual formwork configurations depending on the parapet geometry
  • The influence width depends on the parapet size. The guidelines are approximately as follows:
    • Influence width 1.50 m for cross-sectional areas of parapet up to  0.20 m²
    • Influence width 1.25 m for cross-sectional areas of parapet up to  0.40 m²
    • Influence width 1.00 m for cross-sectional areas of parapet up to  0.60 m²
  • Reasonable moving lengths up to 25 m

Brochure Download